10-27-2020, 12:32 PM
If your access point has a WPS button, then without any confusion select the ‘WPS Connection Method’ as this method is the easiest way of completing canon mg3600 connection setup with Wi-Fi. Just have a glance on the noted lines and follow the same as directed:
First of all, make sure that the printer is ON and the WPS button on the wireless router is accessible
Now, press and hold the Wi-Fi button on the printer until the ON lamp flashes
Press the “Black” button and then the “Wi-Fi” button
Now, make sure the Wi-Fi lamp flashes quickly and the ON lamp is lit. Then, go to your access point and press the WPS button within a couple of minutes
After that, you can see that the blue Wi-Fi lamp on the printer will continue flashing while searching, and the Power and Wi-Fi lamps will both flash when connecting to the access point. Once the printer gets successfully made the connection to your wireless network, the Power and Wi-Fi lamps will stop flashing and remain lit
In the end, make sure that the Wi-Fi lamp and the ON lamp are lit
First of all, make sure that the printer is ON and the WPS button on the wireless router is accessible
Now, press and hold the Wi-Fi button on the printer until the ON lamp flashes
Press the “Black” button and then the “Wi-Fi” button
Now, make sure the Wi-Fi lamp flashes quickly and the ON lamp is lit. Then, go to your access point and press the WPS button within a couple of minutes
After that, you can see that the blue Wi-Fi lamp on the printer will continue flashing while searching, and the Power and Wi-Fi lamps will both flash when connecting to the access point. Once the printer gets successfully made the connection to your wireless network, the Power and Wi-Fi lamps will stop flashing and remain lit
In the end, make sure that the Wi-Fi lamp and the ON lamp are lit